Brass Round Bar Guide for Turning and Precision Components
A practical guide to choosing brass round bar for turning, fittings, terminals, valves and precision parts.
Read Guide →
Free-cutting rods that machine faster than any other metal — the standard raw material for turned parts, valve bodies, terminals and fittings.
Supplied from our Ahmedabad stockyard to engineering, fabrication and manufacturing buyers across Gujarat. Custom cutting and a same-day quotation are available for your required size.
No material feeds a turning shop like free-cutting brass. The lead addition in IS:319 / CZ121 grade makes chips snap into small, manageable pieces instead of stringing, letting spindles run at maximum speed with minimal tool wear. Parts come off the machine with a bright surface that usually needs no finishing operation at all.
Consistency between batches is what separates good brass rod from cheap rod — a single hard spot can scrap a form tool mid-production. Our rods come from established Indian mills with uniform composition certified batch after batch, in diameters from 3mm for micro terminals up to 100mm for large valve bodies. Straight lengths ship from Ahmedabad ready stock.
A practical guide to choosing brass round bar for turning, fittings, terminals, valves and precision parts.
Read Guide →The lead addition in IS:319 / CZ121 grade makes chips snap into small pieces instead of stringing, letting spindles run at maximum speed with minimal tool wear and a bright as-machined surface.
A single hard spot can scrap a form tool mid-production, so our rods come from established Indian mills with uniform composition certified batch after batch.
Diameters from 3mm for micro terminals up to 100mm for large valve bodies are held as straight-length ready stock in Ahmedabad.
Parts usually come off the machine with a bright surface that needs no finishing operation at all, saving a whole step in production.
Yes, material composition certificates are available on request, which matters for valves, fittings and instrument components going into audited work.