6061 vs 6063 Aluminium: Which Grade Should You Choose?
A clear comparison of 6061 and 6063 aluminium for machining, fabrication, structural work and visible sections.
Read Guide →
Extruded and cold-drawn solid round bars for CNC turning, shafts, bushes and pins — straight, burr-free lengths that machine fast with long tool life.
Supplied from our Ahmedabad stockyard to engineering, fabrication and manufacturing buyers across Gujarat. Custom cutting and a same-day quotation are available for your required size.
Aluminium round bar is the most-used non-ferrous machining stock in Gujarat's engineering belt. Our bars are extruded and then cold-drawn to close diameter tolerance, so they run true in the chuck, take light finishing cuts without chatter and leave a surface that often needs no secondary polishing. At roughly one-third the weight of steel, finished shafts, spacers and bushes are lighter to handle and cheaper to ship.
Grade selection is straightforward: choose 6061 for general engineering parts where strength and weldability both matter, 6063 where surface finish and anodising quality come first, and 6082 for the highest load-bearing capacity in the 6000 series. We stock diameters from 6mm to 200mm in Ahmedabad and cut bars to your exact length, so a prototype shop and a production line both buy only what they need.
A clear comparison of 6061 and 6063 aluminium for machining, fabrication, structural work and visible sections.
Read Guide →What to specify when ordering aluminium round bar for CNC work, shafts, pins, spacers and fixtures.
Read Guide →Choose 6061 for general engineering parts needing both strength and weldability, 6063 where surface finish and anodising quality come first, and 6082 for the highest load-bearing capacity in the 6000 series.
Yes. The bars are extruded and then cold-drawn to close diameter tolerance, so they run true in the chuck, take light finishing cuts without chatter and often need no secondary polishing.
Diameters from 6mm to 200mm are held as ready stock in Ahmedabad and cut to your exact length, so a prototype shop and a production line both buy only what they need.
At roughly one-third the weight of steel, finished shafts, spacers and bushes are easier to handle and cheaper to ship, with no risk of rust over their service life.
Yes, mill test certificates covering chemical composition and mechanical properties are available on request, which is useful for audited, export or safety-critical work.