Aluminium Round Pipe — sizes 12.7mm – 150mm OD — Rajesh Aluminium Ahmedabad

Aluminium Round Pipe

Seam-free extruded pipes with concentric bore and smooth inner walls — light, strong rounds for railings, furniture, pneumatic and irrigation lines.

Supplied from our Ahmedabad stockyard to engineering, fabrication and manufacturing buyers across Gujarat. Custom cutting and a same-day quotation are available for your required size.

Because our round pipes are extruded rather than welded, there is no seam to split, leak or show through polishing — the bore stays concentric and the wall thickness even all the way around. That matters for pneumatic lines holding pressure, for railings that get polished, and for any tube that will be bent, flared or swaged during fabrication.

Outside diameters run from 12.7mm to 150mm with wall thicknesses from 1.5mm to 10mm, so the same product family covers a delicate furniture leg and a structural scaffold pole. 6063 is the pick for decorative and polished work; step up to 6061 when the tube is a load-bearing member. Cut-to-length dispatch means no offcut wastage on site.

Available Sizes
12.7mm – 150mm OD
Grades / Alloys
6063 / 6061
Finish
Mill finish / polished on request
Availability
● In Stock — quick dispatch from Ahmedabad
Custom Cutting
Cut-to-length service available

Common Applications

Railings & handrails Furniture frames Pneumatic lines Irrigation systems Tent & scaffolding poles Heat exchanger tubes

Frequently Asked Questions

Are your aluminium round pipes seamless?

They are extruded rather than welded, so there is no seam to split, leak or show through polishing; the bore stays concentric and the wall thickness even all the way around.

What OD and wall thickness range is stocked?

Outside diameters run from 12.7mm to 150mm with walls from 1.5mm to 10mm, so the same family covers a delicate furniture leg and a structural scaffold pole.

Which grade suits railings versus load-bearing use?

6063 is the pick for decorative and polished work; step up to 6061 when the tube is a load-bearing member.

Can the pipe be bent or flared during fabrication?

Yes, the even wall and seam-free construction let the tube be bent, flared or swaged cleanly, which is why it suits railings, pneumatic lines and heat exchanger tubes.

Do you cut pipe to length?

Cut-to-length dispatch means no offcut wastage on site, and you order the exact number of pieces your job needs.

← Back to All Products

Need Aluminium Round Pipe?