Stainless Steel Angle — sizes 25×25 to 100×100mm — Rajesh Aluminium Ahmedabad

Stainless Steel Angle

Structural L-sections for coastal sites, chemical plants and cleanrooms — carrying load for decades where painted mild steel keeps failing.

Supplied from our Ahmedabad stockyard to engineering, fabrication and manufacturing buyers across Gujarat. Custom cutting and a same-day quotation are available for your required size.

Every coastal and chemical facility has the same story: mild steel angle painted, corroded, replaced — on repeat. Stainless angle breaks the cycle because corrosion resistance runs through the full section, not just a surface coat. Once a platform edge, tank stiffener or equipment stand goes in, it stays in.

Hot rolled and pickled supply gives a uniform, passive surface ready for fabrication without descaling. Equal-leg angles from 25×25mm to 100×100mm are regular stock, unequal legs against order. Grade 304 serves food, pharma and general structural duty; 316 is non-negotiable within sight of the sea or downwind of chlorine and acid processes.

Available Sizes
25×25 to 100×100mm
Grades / Alloys
SS 304 / 316
Finish
Hot rolled pickled
Availability
● In Stock — quick dispatch from Ahmedabad
Custom Cutting
Cut-to-length service available

Common Applications

Structural framing Equipment supports Coastal construction Platform edging Tank stiffeners Cleanroom framing

Frequently Asked Questions

Why does stainless angle outlast mild steel angle?

Corrosion resistance runs through the full section rather than a surface coat, so once a platform edge, tank stiffener or equipment stand goes in, it stays in instead of being repainted and replaced.

Which grade near the sea or chemicals?

304 serves food, pharma and general structural duty; 316 is non-negotiable within sight of the sea or downwind of chlorine and acid processes.

Do you supply equal and unequal legs?

Equal-leg angles from 25x25mm to 100x100mm are regular stock, with unequal legs available against order.

Is the surface ready for fabrication?

Hot rolled and pickled supply gives a uniform, passive surface ready for fabrication without descaling.

Where is stainless angle typically used?

In structural framing, equipment supports, coastal construction, platform edging, tank stiffeners and cleanroom framing.

← Back to All Products

Need Stainless Steel Angle?